Do you know the operating procedures for sand screening machines?

Sand screening machines are often used in construction and are familiar to everyone, providing convenience for sand and gravel screening. In use, if not used according to the operating procedures, it may bring unexpected hidden dangers. Let's take a look at the operating procedures for sand screening machines together!

Operators must undergo relevant training and be familiar with the use of the equipment before they can operate it. Before use, they must wear work clothes and avoid wearing jewelry to avoid accidents. Before starting the sand screening machine, rotate the rotor by hand to check for any abnormalities in various parts of the machine. Before operating the equipment, carefully check whether there is any accumulated sand in the sieve and keep it clean. During the maintenance of the sand screening machine, all machinery should be stopped before proceeding with the maintenance.

Before starting up, check whether the oil level of the reducer meets the requirements. If it is insufficient, it should be replenished. It should be checked once a week and the tension of the diagonal belt should be checked and adjusted every day. If any problems are found, they should be replaced in a timely manner. The user should install protective equipment on the V-belt according to the specific situation on site before operation. If the conveyor belt is found to be off track, it is necessary to promptly loosen the bolt of the off track bearing and turn the main beam off track nut to the right to move the head wheel outward. During use, feeding should be done according to the capacity of the machine. Do not feed too much, as it may cause excessive motor load, damage the vibrating feeder, affect the screening effect, and may also reduce the service life of the machine.

When the sand screening machine is running, if abnormal noise is found, repair and cleaning work should not be carried out. The power should be turned off in a timely manner, the machine should be stopped for inspection, and the fault should be eliminated before continuing to work. When the temperature of the bearing oil rises, it is necessary to stop the vehicle in time to check the cause and eliminate it. Pay attention to checking the degree of wear of easily worn parts and replace worn parts at any time. When loading and unloading sand with a shovel, it is strictly prohibited to collide with the sand screening machine. When discharging, the material should be evenly fed and the equipment should not be violently smashed to avoid deformation and affect the use of the machine. After use, wait for the sand blocks to be sieved before stopping the machine. Regularly inspect and maintain the machine, and establish relevant maintenance systems.

The above is the operating procedure for the sand screening machine. Using it according to the operating specifications can not only reduce the risk of accidents, but also extend the service life of the machine. We hope the above content can be helpful to everyone. Welcome to inquire by phone!