What is the normal feeding speed of the concrete batching machine?

What is the normal feeding speed of the concrete batching machine used on the user's site? For example, how many seconds does it take to mix C25 concrete sand and stone with a 350 mixer? In fact, these problems or professional concrete batching machine operators should understand some.

When the blades and lining plates in the mixer are not seriously worn, the mixing time of C25 concrete (collapse degree is about 140) must be 9s-12s. Generally, it is based on the current condition of the mixer ammeter.

The discharge of another concrete raw material machine is not calculated by time, but by weight. In order to reduce the purchase cost, the users of the concrete raw material machine hope to use the metering bucket of the raw material machine to measure the bulk cement at the same time, and put the cement in the cement warehouse into the metering bucket of the raw material machine through the cement screw conveyor. This method is generally not advocated. The cement has good fluidity, and a small amount of cement overflows in the gap between the metering bucket mouth and the conveyor belt, Dust pollution and cement loss on site.

Jianke brand PL series concrete batching machine is the foreground automatic batching equipment of concrete mixing equipment. It can automatically complete the batching procedure of sand, stone, cement and other materials according to the requirements of concrete proportioning. This series of products are suitable for different workplaces. It is composed of storage hopper, weighing system, feeding system, electric control, etc. The structural forms are "I" shaped structure and "pin" shaped structure. The feeding methods include pneumatic door opening type and belt conveying type.