In building materials, the application of sand and gravel is very large. The emergence of sand and gravel separator has brought great convenience to sand and gravel separation and increased work efficiency. In daily work, the maintenance of equipment is very important, which is directly related to the work efficiency and service life of equipment. How to maintain sand and gravel separator? Next, let's take you to understand!
The equipment shall be maintained by specially assigned personnel. It is not allowed to operate the equipment without authorization to avoid potential accidents. After the equipment has been used for many times, some materials will accumulate in the chute. When the sand and gravel separator is completed, it shall be removed in time to ensure that there is no caking in the chute. When using the sand separator, do not pour the concrete into the guide chute without adding water. Before commissioning, pay attention to whether there are foreign matters in the winch and stone separator. If there are any, they shall be cleaned and eliminated in time.
The electric pump shall not be dehydrated for operation. The sand and stone separator shall pay attention to the lubrication and oil filling of the bearing. The grease standard is that the grease overflows slightly from the bearing seal. Check the operation of each motor and water pump of the separator every day. Clean the main equipment in time when the sand and gravel separator is completed after work every day. Regularly clean the waste discharge port of sand and gravel separator to avoid blocking the discharge port caused by mud agglomeration. When the concrete sand separator is not used for a long time, the mixer blade of the mixing tank shall be raised above the water surface, and the submersible sewage pump shall not be immersed in the water.
The rated current of the protection switch equipped with each motor and electric pump shall not be changed at will. When the main equipment of the sand and gravel separator stops working every day, it is required to timely check whether the drum screen of the stone separator in the machine is clean and free of sundries. During the separation of large amount of concrete, the blanking shall be carried out gradually without excessive, so as not to affect the separation effect. The precipitated mud in the two slurry sedimentation tanks shall be cleaned frequently to prevent the precipitated mud from entering the clean water tank.
The above is the maintenance of the sand and gravel separator. Cleaning and maintenance of the equipment can not only prolong the service life of the equipment, but also reduce potential accidents and increase work efficiency. I hope the above contents can be helpful to you. Welcome to inquire!
Address: No. 818, Jingshi Road, Jinan, China
Tel: 0086-531-87453566
Fax: 0086-531-87453566
Postal Code: 250306
Email: sdjkgroup@163.com
jianke3566@163.com