How to maintain the sand screening machine?

Everyone has heard of the sand screening machine. It is often seen in buildings. It can screen the sand and gravel, which brings convenience to production. In daily use, the maintenance of the equipment is very important. Many people do not pay attention to the maintenance of the equipment, which will lead to potential accidents and reduce the service life of the equipment, Next, let's take you to understand how to maintain the sand screening machine!

During the long-term operation, the sand screen will cause some wear and tear to the equipment and reduce the efficiency. Regular maintenance regulations shall be made and maintained according to the specified process. Before starting the sand screening machine, rotate the rotor by hand to check whether there are abnormalities in all parts of the machine. The bearing shall be lubricated and cleaned regularly, and the bearing shall be checked for rust, crack, wear and other phenomena. The transmission parts such as gears shall be lubricated frequently.

Before starting the equipment, check whether the coarse mesh and fine mesh are damaged and whether the harness ring is locked. Check the wear degree of vulnerable parts and replace the defective parts. Keep the equipment surface clean and tidy, often check whether the paint on the surface falls off and rusts, and maintain it regularly. Fasten the parts that are easy to loose and check them from time to time, especially when there is abnormal sound. When the machine is not in use, it shall be stored in a dry environment. It shall not be exposed to rain or moisture. It can be covered with relevant oilcloth to prevent dust.

The temperature of the vibration motor supporting the sand screening machine shall not be too high. The equipment shall be checked frequently. If the temperature is too high, the power supply shall be turned off in time to cool the machine. Add cooling water to the sand screening machine in hot summer and antifreeze to the sand screening machine in cold winter. Regularly clean and clean the underframe plane of the movable device to prevent the movable bearing of the sand screen from moving on the low frame, so as to avoid accidents.

The above is the maintenance of the sand screening machine. Good maintenance of the equipment can not only reduce the hidden dangers of accidents, but also prolong the service life of the machine and increase work efficiency. I hope the above contents can be helpful to you!