The evaluation standard for finished stone products shall include stone particle shape, mud content of stone and whether there are edges and corners. The mud content of stone shall be minimized. For impurities in stone, stone cleaning equipment for stone cleaning shall be selected. The specification of stone shall have a moisture content of about 2%, and the content of finished sand shall also be within a certain range. For the particle size of finished sand, Refined sand machine equipment shall be selected, and refined sand machine equipment shall be selected for the particle size of finished sand; The process of stone cleaning by stone cleaning equipment is as follows: the sand enters from the inlet channel and is driven by the impeller to grind each other to remove the impurities covering the stone surface. At the same time, the water vapor layer covering the sand is damaged to facilitate dehydration and obtain cleaner stones. If the cleaned stones are not clean enough, they need to be cleaned again. Each system of the stone washing machine shall be equipped with a complete storage hopper, support, conveying mechanism, etc. first transport the materials to the storage hopper, and then start the conveying mechanism to transport the materials to the storage hopper through the conveyor belt. The same discharge system is also very important, including discharge conveying mechanism and support, which can quickly send the cleaned stones out through the conveyor belt.
The washing operation of stone cleaning equipment can prevent the blockage of silo, chute, funnel, crushing screen and other equipment, so as to reduce the processing capacity of crushing screen equipment. When the blockage is serious, the production cannot be carried out normally. Extract concentrate; Some ores can enrich useful minerals through ore washing, so as to obtain qualified concentrate, such as some sedimentary manganese ore, Apatite Ore, iron oxide ore, etc. Smelting limestone can improve the quality of slag through ore washing, so as to meet the smelting requirements, such as Chuanshan limestone mine and Wulongquan Limestone Mine.
There are four types of stone washing equipment: drum stone washing machine, screw stone washing machine, vibration stone washing machine and wheel bucket stone washing machine. This product is mainly used in high standard projects such as highway, railway, bridge and tunnel construction. Compared with similar domestic products, it has the characteristics of convenient movement, large processing capacity, good cleaning effect and power saving. It is suitable for the washing of fine and coarse particles. The utility model has the advantages of reasonable structure, convenient maintenance, large processing capacity, low power consumption and high cleaning cleanliness. The new sealing structure, new transmission shaft device and adjustable lower water tank ensure the high efficiency, durability, good cleaning and dehydration effect of this series of products, and maintain stability for fine particle products.
There are many types of stone washing equipment. When purchasing a stone washing machine, we need to consider which one we want to buy and how to determine the model of the stone washing machine we buy. These two points can be realized through the following two points: first, select the equipment that can wash our materials according to the particle size of the stone washing machine; second, The model, model and purchased quantity of stone washing machine shall be determined according to the cleanliness and output of the product.
Address: No. 818, Jingshi Road, Jinan, China
Tel: 0086-531-87453566
Fax: 0086-531-87453566
Postal Code: 250306
Email: sdjkgroup@163.com
jianke3566@163.com